Digital Insulation Tester

MECO DIT 918 DIGITAL INSLATION TESTER

o   3½ Digit 1999 Count Large LCD Display

o   High Accuracy for Insulation Measurement and for AC Voltage Measurement

o   Range Selection & Single Person Push Button Operation

o   LCD with Indicator Switch

o   Data Holding Function, Function Icons on Display

o   Measurement of AC Voltage upto 600VAC

o   Auto Range (Insulation Test)

o   Red LED Indicator for HV (High Voltage)

o   Battery Operated

o   As per IS10656-1983

o   As per Safety Standard IEC / EN 61010-1 & 61010-31

o   Over Voltage CAT III, 600V

o   As per EMC Standard IEC 61326 Class B

 

Additional Information:

• Item Code: DIT918
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: AHMEDABAD
• Production Capacity: Ex STOCK
• Delivery Time: READY STOCK

SILENT FEATURES

· 3½ Digit 17mm LCD Display

· High Accuracy ± (3% rdg + 2 dgt)

· Single Person Push Button Operation

· Designed to Generally Conform to IS 10656-1983

· Meets Requirement of IEC1010, Installation Category II,

· 1000V Phase - Earth

· Terminal Voltage more than 85% of rated Voltage for

· Insulation Resistance Measurement from 10% to 100% of the Insulation Resistance Range

· 5 Models with various Voltage & MOhm Ranges

· Supplied with Carrying Case, Test Probe and Installed Batteries

• Item Code: DIT99
• Production Capacity: As per Deemand
• Delivery Time: Ex-Stock
• Packaging Details: Box Packing

Test Voltages 50V/ 100V/ 250V/ 500V/ 1000V

Test voltages from 50V to 1000V can be selected for Insulation Resistance measurement. It covers all insulation tests up to 1000V.

 

Insulation Resistance Measurement

The instrument is capable of measuring insulation resistance from 10 KOhm ...999 MOhm.

 

Hands-free continuity testing

Continuity testing (0-10 with acoustic signal) can be done without pressing the test button. In addition to the display function, an acoustic signal can be activated which sounds if the adjustable limit value is violated.

 

Voltmeter

Instrument measures voltages > 25V ... 600 V AC/DC.

 

Automatic discharge for capacitive circuits after test Measurement

Capacitive devices under test, such as cables and windings that get charged during the test are discharged by the tester.

 

Live circuit detection

Displays presence of voltages > 25V irrespective of function selected.

 

Pre-selectable measurement time for Insulation Resistance Measurement

In normal course, the insulation test terminates and the measured insulation resistance value remains on display for 2 sec after the test key is released. With the Pre-selectable measurement time feature, the insulation test continues and the measured value remains on the display for the pre-determined time. Pre-selectable time: 10 sec - 5 min.

 

Pre-selectable limit checks (Go/ No-go option) for MOhm

An acoustic signal can be generated when the measured value of insulation resistance falls below an adjustable limit value.

 

Lead resistance null facility

The instrument provides a facility to compensate the resistance of the leads for an accurate measurement of low resistance.

 

Storage of MIN/MAX values

In addition to the display of the actual measured value, the minimum or maximum value can constantly be updated or stored.

 

Storage Memory for last 50 readings

The instrument provides a facility to store and recall 10 values in each of the 5 ranges of insulation resistance measurement.

 

Blown fuse indication

The display FUSE points to a blown fuse.

 

Stop Watch

This function allows you to measure elapsed time up to 1 hour.

 

Auto-power off function

The instrument turns off automatically, if any of the keys or the instrument turns off automatically, if any of the keys or the selector switch have not been activated for about 10 minutes in insulation range and 5 minutes in other ranges or can be switched to continuous operation.

 

Protective holster for rough duty

A holster of soft rubber with tilt stand protects the meter against damage in the case of shock and drop.

 

Low Resistances Measurement (0.01Ohm... 99.9 Ohm)

Low resistances can be measured up to 99.9Ohm. There are two measuring ranges for Low W: 9.99Ohm and 99.9Ohm.

 

• Item Code: INSU10
• Production Capacity: As Deemand
• Delivery Time: EX-STOCK
• Packaging Details: BOX PACKING PER PCS

MECO 5KV HIGH VOLTAGE MULTIRANGE INSULATION TESTER

Meco Brand digital 31/2 digits Insulation Tester model 954, 5kv multi range (1kv-2.5kv-5kv) and Insulation up to 200 G???, having lot of features like Ac Voltage measurement up to 600V, Phase sequence test up to 100V to 450V at 40-60Hz, Back light display, all function Icons on display, LED indicator for HV, Data Hold function, Instrument can be used thru batteries as well as AC adaptor and supplied with Insulation test leads for High Voltage, Phase wire 1 set, Ac adaptor, heavy duty carry case, Instruction manual and installed batteries.

The Agam AIT 501 is the compact insulation resistance tester with diagnostic features like PI, DAR. When carrying out insulation resistance measurements this device uses test voltages of 500V, 1000V, 2500V and 5000V. At 500V this tester can carry out insulation resistance measurements from 1MOhms to 20GOhms, it carries out this measurement at 5MOhms to 1000GOhms.

The tester can also be used to carry out AC/DC voltage measurements and low resistance testing . The AIT 501 is an autoranging device and will automatically choose the applicable range depending on the test. It also includes a large, backlit LCD screen, auto power down function when left idle and includes a USB interface for using the tester to download data to PC.

To accompany USB connectivity the AIT 501 also includes datalogging capabilities. When displaying testing results the

AIT 501 uses both numerical and analogue bar graph representation of the test results. It also allows users to carry out comparisons, polarisation index calculations and dielectric absorption calculations.

• Item Code: AIT501
• Production Capacity: AS DEEMAND
• Delivery Time: EX STOCK
• Packaging Details: READY STOCK